wire shot blasting machine has high cleaning efficiency

1. The wire shot blasting machine adopts a new high-efficiency non-shield motor direct-coupled blasting machine. The shot blasting volume is large under the same power, and the projectile speed is fast (the projectile speed is more than 80 m/s). The arrangement of the blasting machine adopts computer simulation design, multi-angle and all-round throwing of the workpiece, so that the projectile coverage rate is uniform and uniform. The wire shot blasting machine adopts double impeller, and the blade channel closes the mouth to increase the hit density on the projectile throwing ray material. The impact of the big blow is to improve the cleaning effect. At the same time, it has the advantages of easy blade replacement and simple repair. It takes only 3 to 6 minutes to replace the blade. The separation device adopts the most advanced overflow induction and full curtain curtain type ball and slag separator. The separation efficiency can reach 99.9%.

2.The wire shot blasting machine adopts the advanced BE type slag separator, which greatly improves the separation amount and separation efficiency, reduces the impurity content in the circulating projectile, improves the shot blasting quality of the blasting machine, and reduces the blasting machine blade. Wear and tear.

3. The box-type external blasting machine cleaning room of the wire shot blasting machine is changed to the built-in blasting machine cleaning room, and the projectile hits the wire material workpiece at a close distance, which greatly increases the efficiency and effect of cleaning and rusting. The four blasting machines are arranged 180 degrees apart, which enhances the uniformity and full enveloping of the wire cleaned by the projectile, and solves the problem of “yin and yang” in the cleaning process of the workpiece.

4. The anti-reverse of the elevator adopts double insurance design: First, the transmission head wheel adopts the ratchet pawl mechanism to prevent reversal, and the second is that the transmission motor adopts the brake motor to prevent reversal. At the same time, there is a throwing detection alarm device at the passive wheel.

Wire shot blasting machine has good sealing effect

Considering the projectile flying condition during the shot blasting process, the wire shot blasting machine produced by our company has a multi-layer resin curtain and a sealing brush sealing box at the entrance and exit of the blasting chamber workpiece, that is, when the workpiece runs to Before the cleaning station is cleaned, the resin rubber plate and the brush cover the splashed projectile inside the chamber body, completely blocking the projectile from flying outward from the interior of the chamber body.

Wire shot blasting machine performance is safe and reliable

1. The electrical control of the wire shot blasting machine interlocks the functional components and ensures that the blasting machine cannot be opened when the cleaning room access door is opened to prevent the projectile from injuring people.
2. The dust collector, elevator, bottom screw conveyor and inspection door of the wire shot blasting machine are interlocked with the blasting machine opening. When the blasting machine is turned on and running smoothly and reliably, the abrasive dosing valve can be opened. The blasting media in the separator continuously enter the blasting machine, which is thrown by the high-speed rotating blades, hits the surface of the wire, cleans the grease and rust on the surface of the wire, and the wire exhibits a bright metallic luster. It can realize the rapid conveying of wire workpieces and the functions of continuous feeding, unloading and shot blasting. The acid-free environmental protection wire rod rust shot blasting machine has the advantages of no pickling, environmental protection, energy saving, high efficiency and convenient use. In one body, its main function is to remove the scale, grease and rust on the surface of the wire by non-pickling, so that the surface of the wire can be cleaned well. At the same time, it can eliminate the internal stress of the wire, improve the fatigue strength of the wire surface and prolong the service life. It eliminates the pollution caused by the pickling and rust removal of the wire and the harm to the human body.

5. The workpiece detecting device effectively controls the opening and stopping time of the blasting machine, avoids the empty throwing of the blasting machine, saves energy, and improves the life of wearing parts such as chamber body guard and blasting machine.

6. This machine is equipped with automatic fault detection, alarm, delay automatic stop after alarm, etc.

7. Adopt high-efficiency filter cartridge dust collector and dust emission within 50mg/m3, which improves the working environment of workers.

8. The conveying roller adopts frequency conversion speed regulation, and the cleaning speed can be adjusted at any time by 0.5-2m/min to achieve the ideal shot blasting effect (Sa2.5 level).