Key Benefits of Rocker Barrel Blasting Machines
- Reliable and cost effective
- Inclues an efficient loading and unloading vibrating conveyor
- Work is cleaned continuously and automatically without added labor
- Variable rocking and decline angle or turning over many different part shapes.
- Designed for high performance in-line cleaning.
- Available in a range of sizes with blast wheel horsepower options to satisfy low to high production.
Features of Rocker Barrel Blasting Machines
- Continuous full automatic operations.
- Automatic controlled abrasive flow gates.
- Heavy duty rocker barrel system, with automatic speed control.
- Optional double elevator which reduce total height for space limitation constrictions.
- Heavy duty manufacturing standards for foundry.
Applications of Rocker Barrel Blasting Machines
Rocker Barrel Blasting Machines provide a cost-effective means of cleaning from 5 to 30 tons per hour of ferrous and non-ferrous products including:
- Manifolds
- Cylinder sleeves
- Connecting rods
- Cams & pistons
- Pipe fittings
- Etc.
Rocker Barrel Blasting Machines
Rocker Barrel Blasting Machines by BlastKing are designed with variable angle rocker drum systems and provide gentle turning of the work with fully controllable, complete blast coverage. Only BlastKing Rocker Barrel Machines offer all of these benefits:
• Variable feed rates
• Easy loading
• Fully self emptying
• Handles hot (250° F) work
• Mixed loads – including risers and runners
Equipped with 30, 40, 50 or 60 HP direct drive or spindle drive ORICA wheels, these barrels deliver more abrasive per HP for faster cleaning cycles with less noise.
- The rocking angle is variable for turning over many different part shapes.
- Exposure to the blast streams and flow rate through the machine is controlled by the decline angle of the barrel.
- Both the rocking motion and the decline angle are easily adjusted from the control panel.
Shot Blasting Cabinet
The blasting chamber is fabricated by high strengthened steel plates and profile steel which ensures adequate intensity and rigidity of the machine. ,blast wheels layout adopt 3-D dynamic simulation design, which ensures optimal shot blasting angle and distance.
As with all BlastKing Blast Machines adopt easy replaceable high manganese steel guard liner on hot blasting zone, which is hard enough to deal with the shot blasting hardness up to 60HRC. The overlapped liner blocks are installed inside the blasting chamber which eliminate any possibility that the high speed blasting media will hit the blasting chamber directly.
High impact toughness can make full use of the reflection kinetic energy of shot to continue to blast cleaning the surface of work piece, so greatly enhance the cleaning efficiency and quality.
High chrome wear resistant perforated saddle plate are deployed at the bottom of the blasting chamber which ensure the used blasting media will appropriately get into the abrasive recycle system and prevent any damages to the bottom reclaim system.
Cartridge Filter Unit
Each BlastKing machine is equipped with multiple cartridge filters. These filters are necessary to remove any impurities from the air used to blast resulting in a more even, direct, and effective blast.Benefits experienced with the BlastKing’ cartridge filters:
Large distance between folds in each cartridge filter leads to precise cleaning and better air pressure.
The impact separator within the cartridge filter unit ensures that the broken down fines are separated (which protects the filter cartridge against unnecessary wear).
The cartridge filters clean the cartridge automatically using an air pressure pulse, the intensity and duration of the pulse can be adjusted according to the type and amount of dust.
Pressure difference is monitored to automatically set the cleaning cycle increasing the life time of the cartridge and saves compressed air.
Easy exchange of cartridge filters.
Correct contact pressure.
Low compressed air consumption.
Constant cleaning, from top to bottom, due to conical design of the cartridge filter.
BlastKing ORICA Wheel
BlastKing group have the patented technology of the direct drive blasting turbine which motor power from 7.5kw to 75kw.
References to Continuous Rocker Barrel Blasting Machines
Installation, Post-sales, Training & Safety
BlastKing Provide turnkey installation for the shot blaster. DIY installation by customer is also available according to the comprehensive documents, videos and drawings which provide by BlastKing, our engieers team also can provide real-time installation guidance.
The successful implementation of any blasting equipment is based upon the total commitment and dedication to the process. BlastKing’s field technicians are involved in the installation and training of the programmer and operator at the customer’s site or at BlastKing’s training facility. BlastKing has developed a complete program of maintenance training seminars. These are scheduled not only for new users but also for existing users. This structure is ideal for customers to send new employees so they can become more conversant with all BlastKing’s equipment.
Guarantee time of shot blasting machine will be one to five years. Technical support will be during the whole blasting machine life. Consumable spare parts will be supplied periodically.
All the equipment from BlastKing is conformity with CE&BV standard, and our factory have ISO9001, ISO14001 certification.
General emergency stop button is on all the BlastKing’s control panel. And sub emergency stop buttons are on conveyor systems. Detectors on the blast wheel covers, blasting chamber windows, elevators, separators will protect safety of the operators. Dust collection unit of shot blast machine dust emisssions is under 3mg/m3 which also bring dust free working environment.
