Technical Specifications of Cylinder Automatic Shot Blaster
| Machine type | BK3-6C | BK5-12C | BK8-20C | BK10-25C | BK12-30C |
|---|---|---|---|---|---|
| Max. piece Dia. x Height (mm) | 300*600 | 500*1200 | 800*2000 | 1000*2500 | 1200*3000 |
| Max height of chamber(mm) | 4700 | 5900 | 6700 | 7200 | 7700 |
| Max width of chamber (mm) | 4200 | 5100 | 5900 | 6100 | 6300 |
| Max length of chamber (kg) | 5000 | 8500 | 8500 | 10500 | 10500 |
| No. of wheels x power (KW) | 4x 7.5 | 8x7.5 | 12x11 | 12x 11 | 12x 11 |
| Total installed power(KW) | 41 | 72 | 143 | 147 | 157 |
| Exhausted air quantity (m3/h) | 6000 | 12000 | 18000 | 22000 | 25000 |
| Foundation pit | Yes | Yes | Yes | Yes | Yes |
- The technical data is not binding and may be subject to change.
Depending on the type of parts, production method, etc., further machine types and measurement specification sheets upon request.
Key Benefits of Cylinder Automatic Shot Blaster
- Latest transport technology
- Highly efficient blast wheels
- Short blasting times
- Multiple machine sizes and variations
Features of Cylinder Automatic Shot Blaster
- Latest transport technology
- Highly efficient blast wheels
- Short blasting times
- Multiple machine sizes and variations
Applications of Cylinder Automatic Shot Blaster
- Removal of mill and forge scale as well as rust
- Blasting of steel constructions as pre-treatment before painting
- Removal of burrs and flashes
- Increase of surface roughness
- Removal of moulding sand and residues
Cylinder Automatic Shot Blaster with Overhead Rail Conveyor
A special feature of the continuously pass-through monorail shot blasting machine is the constant travelling speed of the workpieces. The ability to adapt the moving speed of the workpiece and the wheel power ensures that the machine can be easily and smoothly integrated into an existing production line.The abrasive is pre-accelerated very efficiently by the ORICA blast wheels, allowing for short treatment times and reduced abrasive consumption when compared to conventional blast wheels. Maximum coverage of the workpiece is achieved by the blast wheels being arranged in an “X” alignment, diagonally to the moving workpiece. In this formation, the leading edges of complex components, welded sections and flame-cut parts can be thoroughly blasted.
Shot Blasting Cabinet
The blasting chamber is fabricated by high strengthened steel plates and profile steel which ensures adequate intensity and rigidity of the machine. ,blast wheels layout adopt 3-D dynamic simulation design, which ensures optimal shot blasting angle and distance.
As with all BlastKing Blast Machines adopt easy replaceable high manganese steel guard liner on hot blasting zone, which is hard enough to deal with the shot blasting hardness up to 60HRC. The overlapped liner blocks are installed inside the blasting chamber which eliminate any possibility that the high speed blasting media will hit the blasting chamber directly.
High impact toughness can make full use of the reflection kinetic energy of shot to continue to blast cleaning the surface of work piece, so greatly enhance the cleaning efficiency and quality.
High chrome wear resistant perforated saddle plate are deployed at the bottom of the blasting chamber which ensure the used blasting media will appropriately get into the abrasive recycle system and prevent any damages to the bottom screw conveyor.
Cartridge Filter Unit
Each BlastKing machine is equipped with multiple cartridge filters. These filters are necessary to remove any impurities from the air used to blast resulting in a more even, direct, and effective blast.Benefits experienced with the BlastKing’ cartridge filters:
Large distance between folds in each cartridge filter leads to precise cleaning and better air pressure.
The impact separator within the cartridge filter unit ensures that the broken down fines are separated (which protects the filter cartridge against unnecessary wear).
The cartridge filters clean the cartridge automatically using an air pressure pulse, the intensity and duration of the pulse can be adjusted according to the type and amount of dust.
Pressure difference is monitored to automatically set the cleaning cycle increasing the life time of the cartridge and saves compressed air.
Easy exchange of cartridge filters.
Correct contact pressure.
Low compressed air consumption.
Constant cleaning, from top to bottom, due to conical design of the cartridge filter.
BlastKing ORICA Wheel
BlastKing group have the patented technology of the direct drive blasting turbine which motor power from 22kw to 75kw.
References to Pass-Cylinder Automatic Shot Blaster with Overhead Rail Conveyor
Installation, Post-sales, Training & Safety
BlastKing Provide turnkey installation for the shot blaster. DIY installation by customer is also available according to the comprehensive documents, videos and drawings which provide by BlastKing, our engieers team also can provide real-time installation guidance.
The successful implementation of any blasting equipment is based upon the total commitment and dedication to the process. BlastKing’s field technicians are involved in the installation and training of the programmer and operator at the customer’s site or at BlastKing’s training facility. BlastKing has developed a complete program of maintenance training seminars. These are scheduled not only for new users but also for existing users. This structure is ideal for customers to send new employees so they can become more conversant with all BlastKing’s equipment.
Guarantee time of shot blasting machine will be one to five years. Technical support will be during the whole blasting machine life. Consumable spare parts will be supplied periodically.
All the equipment from BlastKing is conformity with CE&BV standard, and our factory have ISO9001, ISO14001 certification.
General emergency stop button is on all the BlastKing’s control panel. And sub emergency stop buttons are on conveyor systems. Detectors on the blast wheel covers, blasting chamber windows, elevators, separators will protect safety of the operators. Dust collection unit of shot blast machine dust emisssions is under 3mg/m3 which also bring dust free working environment.
